Toa DD-2000 Series Manual Bedienungsanleitung

OPERATING INSTRUCTIONSDIGITAL MIXER D-2000 Series(Version 4)Thank you for purchasing TOA's Digital Mixer. Please carefully follow the instruction

102.3. D-911 VCA Fader UnitThe D-911 VCA Fader Unit is designed for use with the D-2008SP. Connecting to the D-984VC VCA Control Module installed in t

113. OPERATIONS3.1. D-2008SP OperationUsing the front panel-mounted keys, preset memories can be recalled, and input or output channel to bemonitored

123.1.1. Recalling preset memoriesFollow the procedure below to recall each parameter setting stored as preset memory* using the D-2000Setting Softwar

133.1.2. Selecting the input or output channel to be monitoredD-2008SP's input or output channels in operation can be monitored.Step 1. Press the

14LightsLightsCONSOLED-2008SP frontD-2012CLine L: 1Monitor number indicated channelsLine R: 2Headphone output L:Headphone output R:34Monitor numberSte

153.1.4. Selecting CobraNet's monitor channelsWhen the D-2000CB CobraNet Interface Module has been inserted into the D-2008SP and connected to ot

16D-2008SPEnabling the key lock function disables the left and right key operation.LightsHold down for approximately 5 seconds.KEY LOCKGoes outHold do

173.2. D-2012C Operation3.2.1. Key-assignable functionsThe following functions can be assigned to the D-2012C's function keys. The function keys

183.2.2. Preset memory recallEach parameter stored as preset memory using the D-2000 Setting Software or the D-2012C can be recalled.[Operation]Pressi

193.2.5. D-2008SP level indicator control (LED control)This function turns off the level indicators on the front panel of the D-2008SP Digital Mixing

21. HANDLING PRECAUTIONS• The power supply cords supplied with the D-2008SP and D-2012C are designed for exclusive use with eachequipment. Never use t

203.2.6. Fader layer switchingThere are 12 motorized faders and 8 rotary encoders on the D-2012C's operation panel. Store a combinationof their c

213.2.7. D-2008SP control output ON/OFF (console switch)Enables or disables the contact output of the D-981 or D-983 Remote Control Module installed i

223.2.9. Key lock function ON/OFFSetting the Key Lock function to ON allows operation of the following keys to be disabled: the D-2012C'soperatio

233.2.10. Monitor channel clearThis function clears the selection of all the monitor channels assigned to the monitor bus to which the D-2012C in oper

133-22-166-6BURL: http://www.toa.jp/3.3. D-911 OperationOnly the D-2008SP's channels to which the D-984VC module is connected can be controlled.

32. NOMENCLATURE AND FUNCTIONS2.1. D-2008SP Digital Mixing Processor UnitThe D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio

41. Power switch [POWER ON/OFF]Power is switched on and off with eachdepression of this switch.2. Power lampLights when the power switch is set to ON.

52.2. D-2012C Remote Console UnitThe D-2012C is designed to be used with the D-2008SP Digital Mixing Processor. The D-2012C can be LAN-connected to th

6• A-Section1234• B-Section651. Power switchPower is switched on and off with eachdepression of this switch. 2. Power indicatorLights when the power i

7• C-Section78910117. Level indicators [PEAK, +12 dB, 0 dB, –40 dB]Indicate signal levels for each channel. Pre-fadervalue is indicated for input chan

8• D-Section7810912Note: Refer to p. 7 for names and functions of parts 7 – 10.12. Rotary encoders (1 – 8)Adjust the volume of each input or outputcha

9• E-Section131415• F-Section16171813. Line input signal level indicators [SIGNAL, PEAK]Display the signal level set with the Line inputvolume control