Toa F-2852CU2 Bedienungsanleitung PDF herunterladen (Seite 8)

6. WIRING

6.1. Wiring through Hard or Flexible Conduit

Note

The choke bracket equipped with the speaker has not been evaluated by UL, for conduit connection and

UL514B Standard.

Flexible conduit of 3/8 or 1/2 inch trade size and the UL514B conduit fitting of the same trade size can also be

used. When using the UL514 listed conduit fitting, detach the equipped choke bracket and mount the conduit

fitting instead.

Loosen the screw to allow the speaker cable to pass through.

Choke bracket

Flexible conduit

Retighten the screw to fix

the flexible conduit.

Note

Ensure that the flexible conduit is securely fixed.

Connector cover

After completing the speaker cable connection, turn the connector cover

in the direction indicated by the arrow, and fix the cover with 2 screws.

Plug the wired input connector into the speaker's socket,

then pull the speaker cable from the choke bracket.

(For wiring the input connector, refer to p. 10.)

Accommodating larger diameter conduit

The choke bracket accommodates up to 3/8-inch

(9.5 mm) flexible conduit. When larger diameter

conduit should be fit, use a suitable fitting

commercially available by replacing the existing

choke bracket with it. Detaching the choke

bracket by unscrewing it exposes a 7/8-inch (22

mm) hole. Install the alternate fitting there.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Toa F-2852CU2 Bedienungsanleitung Seite 8